Aluminum profile for suspended ceilings
An aluminum profile for suspended ceilings, which is used in the harpoon technique of stretching ceilings, allows for quick and high-quality installation, namely, fixing a canvas that will last a long time, and also, if necessary, quickly dismantling the canvas and reinstalling it without much difficulty. Thanks to its high strength aluminum profile for suspended ceilings provides reliable and durable fastening, including good corner retention when cutting.
Thanks to the well-thought-out thickness of the front wall, the aluminum profile for installing suspended ceilings can withstand a fairly large tension force of the canvas, unlike a plastic profile.
Aluminum profiles for suspended ceilings, designed for a wedge system, consist of a fastening profile, a special fixing wedge and a decorative plinth, which gives the stretch ceiling a finished and neat look, allowing you to create original designs for a variety of rooms.
PRODUCTS
SERVICES
Aluminum profile
Aluminum CEILING PROFILE No. 3
It is used for fastening stretch ceiling panels to a load-bearing ceiling and any horizontal surfaces. The fastening step is 20-30 cm. The minimum loss of ceiling height is 2 cm. The gap formed between the wall and the ceiling is closed with a masking one. When installing canvases on ceiling moldings, straight blades are used.
Profile material – aluminum.
The length of the supplied profile is 2.5 running meters.
Universal aluminum profile No. 4
It is used for attaching stretch ceiling sheets to any vertical and horizontal planes; it has high rigidity, so it can be attached to a wall or ceiling in increments of up to 50 cm. The minimum loss in ceiling height is 3 cm. The gap formed between the wall and the ceiling is closed with masking tape.
When installing canvases on a universal baguette, straight blades are used.v The profile material is aluminum.
The length of the supplied profile is 2.5 running meters.
The profile is presented with step perforations every 15 cm. Supplied with sticks 2.5 m.p.
Profile for wall stretch ceiling No. 5
Used for attaching stretch ceiling fabric to walls and any vertical surfaces. It has sufficient rigidity, does not repeat small unevenness of the wall, requires fastening in increments of 15 - 20 cm. The minimum loss of ceiling height is 3.5 cm. The gap formed between the wall and the ceiling is covered with masking tape.
When installing canvases on wall moldings, straight blades are used.
Profile material – aluminum.
The length of the supplied profile is 2.5 running meters.
The profile is presented with step perforations every 15 cm. Supplied with sticks 2.5 m.p.
Aluminum dividing profile
Aluminum separating profile No. 6
It is used for joining two stretch ceiling sheets, when going around columns, and covering large areas. The minimum loss of ceiling height is 2 cm. The gap formed between the panels is closed with masking tape No. 15. When installing the panels on the separator, straight blades are used.
Profile material – aluminum.
The length of the supplied profile is 2.5 running meters.
Cost of aluminum profile for suspended ceilings
The price of an aluminum profile for suspended ceilings depends on the cost of aluminum on the London Metal Exchange - LME and on the grade of aluminum. Therefore, if you want to get more detailed advice on this issue, then it is best for you to call our consultants and the manager responsible for this will give you detailed answers.
