Aluminum Profile Extrusion Die
If your profile is not included in our catalog, but the tool for its production is available.
You can check the availability of equipment for the production of aluminum profiles or select an approximate analogue by calling us.
If it was not possible to find a suitable aluminum profile configuration, we suggest that you manufacture a set of pressing tools according to individual drawings (die for aluminum profile)
By paying for the tool for the production of aluminum profiles, you can forget about further problems - repair, restoration and re-production of dies is free.
In addition, you can count on a discount when ordering matrices from 50 to 100%, i.e. receive the matrix absolutely free of charge if you enter into a supply agreement with a limitation on the minimum volume of aluminum profile consumption.
PRODUCTS
SERVICES
How the matrix is made.
Imagine a steel, polished pancake with a diameter of 260 and a thickness of 70 to 90 millimeters. This is a blank for the future matrix. It ends up on the table of an electroerosive machine in order to burn through the cross section of the future profile using a graphite electrode in the center of the “pancake”. Spark by spark, melting metal particles, the electrode goes deeper into the workpiece. After 5-7 hours the hole is ready.
The matrix is turned over, and on the reverse side the existing section is once again burned through with another, “thicker” electrode, but not right through, but to a very calculated depth. Moreover, in different parts of the cross-section the depth is different, so the output electrode also has a complex relief at the end, called “belts” in jargon. Then the tool makers work their magic with the matrix: they file the working section, polish it, nitrid it, hone it with diamond paste...
die for aluminum profile.
Equipment for extrusion of aluminum profiles.
